Problems configuring 802.11s network

[Maxence Dalmais]

Hi Javier number 1  and 2,

The current problem seems to be an IP one and not a 802.11s / L2 one.
You get two interfaces in the same ip range. So the routing table redirect
the packet trhow the first interface configure in this pool -> wlan0
You can test with using the -I option of the icmp command.

If you want too keep the two different mesh network, you can change the Ip
pool.
Otherwise, you can build a bridge including your two wlan interface and
configure the Ip on the bridge interface.

Regarding Javier Cardona's mail and as explained in
http://o11s.org/trac/wiki/HOWTO#MeshPortalMPP , all should'nt work.

Maxence.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://open80211s.com/pipermail/devel/attachments/20091109/e7584a91/attachment.html